Bill's Early Bronco build

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Bill's Early Bronco build

Postby Bill » Tue May 06, 2014 1:23 pm

Sold my red 71 bronco to build a new , more offroad capable Bronco, and a BBQ. The wifey was a little angry at the prospect of me having another Bronco and her NOT having a BBQ. So I built a new one. Now maybe she will shut the hell up
Attachments
photo.JPG

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Tue May 06, 2014 1:27 pm

So ,,, I sold and traded a rusty tub for a less rusty tub,, easier to start with ,, less clean up ect,, yes it has satellite TV
Attachments
IMG_0025.JPG

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Tue May 06, 2014 1:41 pm

Got a frame up north from a guy,, Darrel Jones from Performance Engineering sand blasted it for me ,,, I will do all the work needed for the links then he will sand blast it again and then paint it. For this I gave him a trailer and a pick up load of old and new wood. Plus I have to take him and his wife to Outback ... He drove a hard bargain. I will cut off all the spring perches and shock mounts, to ready it for the 4 link . ,,,That is a 38" MTR I realized once they were home MTR's are very close to what the size says on the tire. They are freakin huge
Attachments
IMG_0004.JPG

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Tue May 06, 2014 1:48 pm

Bought some hiems from wayno,,, AKA Sanders Offroad.
Attachments
IMG_0017.JPG

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Tue May 06, 2014 2:07 pm

I wanted an ARB for the back of the new bronco so it would drive more like a car , but ARB's are expensive , I happen to see a guy selling 2 narrowed dana 60 axles with ARB's front and rear on pirate 4x4 . They were narrowed for early bronco width but I fully intended to go full width because my Bronco will be rear steer and I wanted tire clearance, but, I wanted the ARB's all this was 2800. But the guy wanted to do some trading, I first found out one of the ujoints had been welded to the axle ear , that got him down to 2400. Then he said he wanted some 5 on 5.5 beadlocks. I had some I was trying to sell . He also wanted the hydro assist and pump off the blue bomber. I also had a ford 9 inch 3rd member he said he wanted. That got him down to 1000 cash and the rest in parts . I discovered the rear was a keyed axle rear end , the locker will only work on keyed rear 60's . The front I could use. The rest I sold on the way home from northern Ca, Via text messages to Bronco friends. Got 1700 for both axles and a rear ARB, kept the front ARB for me. All were 5:38"s and serviceable , which is what I'm using
Attachments
IMG_0018.JPG

Site Admin
User avatar
Posts: 352
Joined: Wed Feb 29, 2012 11:28 pm
Location: Bakersfield, CA

Re: Bill's Early Bronco build

Postby Jeremyrowell » Tue May 06, 2014 3:11 pm

Looks like it's coming along nicely! The BBQ is Amazing!

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Wed May 07, 2014 6:04 pm

Marsha says thank you , I am no longer connected to the BBQ in any way other than I see it when I go out there. It belongs to Marsha now my part is done. I was only the laborer and money guy.

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Wed May 21, 2014 12:45 pm

Cutting off all brackets and grinding where they were,,, tedious and dirty work
Attachments
DSCN0173.JPG

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Wed May 21, 2014 12:51 pm

Found a GT40 tube intake and plenum on ebay ,,, these things are not cheap ,, also found a 65mm (same as explorer) polished throttle body
Attachments
IMG_0011.JPG

Posts: 181
Joined: Sun Mar 18, 2012 9:47 am

Re: Bill's Early Bronco build

Postby Bill » Wed May 21, 2014 1:04 pm

So,,, my neighbor down the street decided to sell his jeep ,, I raved about the 9.5 ti warn winch when he originally bought the jeep . I asked , are you selling that winch with the jeep?, he said ya the kid wants a winch . I told him I had a Ramsy 8000 pounder in my shed witch came off of the blue bomber and that I would give him 600 and the Ramsy for the warn w/synthetic rope and that I would change it all out in one afternoon. It was a win/win for him he got an extra 600 for the jeep and there was still a winch on it for the new buyer. It was a done deal.
Attachments
DSCN0176.JPG

Next

Return to Readers Rides- Post Pics Here

Who is online

Users browsing this forum: No registered users and 1 guest