Gene's Jeep Make over

Posts: 5
Joined: Sat Mar 03, 2012 9:28 pm

Gene's Jeep Make over

Postby Gene Curtis » Thu Apr 12, 2012 9:19 pm

I won't be wheelin for a while. After Mike fixed my anti-wrap bar I started inspecting my jeep and I'm finding lots of little problems. Stress cracks, loose bolts and rust to name a few. I ordered a complete exhaust system and found some seats in a junk yard. Any one know what automatic trans will fit my 4.0? I'll post pics as I go.

Site Admin
User avatar
Posts: 352
Joined: Wed Feb 29, 2012 11:28 pm
Location: Bakersfield, CA

Re: Gene's Jeep Make over

Postby Jeremyrowell » Fri Apr 13, 2012 8:26 am

Come on! Squirt a little JB weld on it and Go!!! :P

Site Admin
User avatar
Posts: 352
Joined: Wed Feb 29, 2012 11:28 pm
Location: Bakersfield, CA

Re: Gene's Jeep Make over

Postby Jeremyrowell » Fri Apr 13, 2012 8:33 am

I have an AW4 out of an 87 XJ that I think would work... what year is your heep Gene?

Posts: 5
Joined: Sat Mar 03, 2012 9:28 pm

Re: Gene's Jeep Make over

Postby Gene Curtis » Fri Apr 13, 2012 5:06 pm

Jeremyrowell wrote:I have an AW4 out of an 87 XJ that I think would work... what year is your heep Gene?

Did you mean Jeep not "heep"? :cry: It's a 93 YJ

Posts: 5
Joined: Sat Mar 03, 2012 9:28 pm

Re: Gene's Jeep Make over

Postby Gene Curtis » Fri Apr 13, 2012 5:50 pm

Just did some research on line and found this from Novak "Transfer Case Compatibility -----
The Jeep AW4 was factory-married to the Jeep Jeep New Process (aka New Venture) Model 231 transfer case, in addition to the NP242 Full-Time transfer case." I'll call you later tonight about it.

Thanks
Gene

Site Admin
User avatar
Posts: 352
Joined: Wed Feb 29, 2012 11:28 pm
Location: Bakersfield, CA

Re: Gene's Jeep Make over

Postby Jeremyrowell » Fri Apr 13, 2012 6:05 pm

Gene Curtis wrote:Just did some research on line and found this from Novak "Transfer Case Compatibility -----
The Jeep AW4 was factory-married to the Jeep Jeep New Process (aka New Venture) Model 231 transfer case, in addition to the NP242 Full-Time transfer case." I'll call you later tonight about it.

Thanks
Gene

Ya, should work fine for you. I pulled it when my T-case went out. Put an aw4 and 231 from my parts vehicle back in. So it's just sitting in my driveway. Needs an NSS switch and a t-case and you are good to go.

Return to Readers Rides- Post Pics Here

Who is online

Users browsing this forum: No registered users and 1 guest